Meet FLUX Ador, the world’s first color printing laser cutter. Powered by three high-quality, interchangeable modules, Ador enables you to engrave and cut through a wide range of materials while enhancing your projects with a pop of color.
• Cutting data is tested based on the existing material thickness. • Smooth materials like acrylic or leather may restrict ink adhesion. • To keep colors from fading, it is recommended to avoid water-washing. • Color printing does not support UV resistance.
Printing Module
Add-on
Printing Module Add-on
Utilizing color blending technology, we shift from simple single-color printing to produce vibrant multi-color effects, enhancing the vibrancy of your creations.
1. Place material then autofocus
2. Place material then autofocus
3. Place material then autofocus
4. Place material then autofocus
CMYK Eco Solvent Ink
Ador comes with Cyan, Magenta, Yellow, and Black Ink Cartridge each. Simply swap the cartridge for colored prints.
*Single-color printing offers a resolution of 300 DPI, and blended-color printing provides a resolution of 150 DPI.
Beam Studio features AI Background Remover, allowing you to effortlessly remove the background of an image with one click, providing you with a seamless experience.
Shield your vision with OD5-grade material. Less than 0.001% of laser passes through the lid.
Run into an Emergency?
Press the emergency red button on the right side of the machine to instantly cut power off for when hazards occur.
Beam Air, Your 4-Layer Filter Protection
Beam Air uses a highly effective 4-layer filtration system and a brushless motor with superior air intake to block harmful molecules and odors generated during laser engraving/cutting.
Ador Specifications
Dimensions
637 x 488 x 226 mm
Weight
19 kg
Power
AC 110-240V
Display Screen
5 inches
Camera
8MP
Connectivity
Wi-Fi / USB/ Ethernet (by USB Dongle)
Max Engraving Speed
400mm/s
Laser Specification
10W / 20W Diode Laser
2W Infrared Laser 1064 nm
Laser Resolution
Max 1000 DPI
Printing Resolution
300 DPI / Single Color
150 DPI / Blended Color
Work Area
10W Diode Laser
“>”>430 x 300 mm
20W Diode Laser
“>”>430 x 290 mm
2W Infrared Laser
“>”>430 x 282 mm
Printing Module
“>”>430 x 270 mm
Work Area Depth
With Triangular Prism
20 mm
Without Triangular Prism
30 mm
Software
Operating System
Windows / macOS / Linux / ChromeOS / iOS / Android
File Type
JPG / PNG / SVG / DXF / AI / PDF
FAQ
General
1. What is Ador?
Ador is the world’s first color printing laser cutter. Powered by three interchangeable modules including 10W/20W Diode Laser, 2W Infrared Laser Add-on and Printing Add-on. Ador enables you to engrave and cut through a wide range of materials while enhancing your projects with a pop of color.
2. I’m new to all this, what if I still have questions?
You can easily find answers to the most common questions in our Help Center. You can also contact our customer support team [email protected].
About Hardware and Software
1. How many laser modules does Ador offer?
Ador currently offers three interchangeable modules: 10W/20W diode laser module, 2W Infrared Laser Add-on and Printing Add-on.
2. What is the laser wavelength of Ador?
The diode laser module has a wavelength of 445nm, while the 2W Infrared has a wavelength of 1064nm.
3. What is the laser spot size of Ador?
10W diode laser’s laser spot is 0.06 x 0.08mm; 20W diode laser’s laser spot is 0.07 x 0.11mm.
4. What is Ador’s maximum engraving speed?
Ador can achieve an engraving speed up to 400mm/s.
5. What is the expected lifespan of the diode laser modules?
Under normal usage conditions, the diode laser modules have a lifespan of 10,000 hours.
6. What are the dimensions and weight of Ador?
The machine’s dimensions are 637 x 488 x 226mm, and its weight is 19kg.
7. Does the machine have a camera preview feature?
Ador is equipped with an 8MP high resolution camera for precise material positioning and efficient alignment.
8. What software is needed to operate the machine?
Ador supports Beam Studio and LightBurn (coming soon) software. It is compatible with Windows, macOS, Linux, ChromeOS, iOS, iPadOS, and Android.
9. How is Ador connected?
The machine can be connected via WiFi, USB cable, or Ethernet (with an adapter).
10. What file formats does Ador support?
Ador supports SVG / PNG / JPG / DXF / PDF / AI.
11. Does Ador require optical alignment?
Ador’s modules are lightweight and can be directly installed on the optical axis, eliminating the need for optical alignment or bulky water cooling systems that CO2 lasers require.
12. Does Ador require periodic cooling water replacement?
Both the diode laser module and 2W Infrared Laser Add-on come with built-in cooling fans, eliminating the need for an external water cooling system.
13. What are the differences between diode laser and infrared laser?
The main difference between the 10W and 20W diode laser is their power; it will provide stronger cutting capabilities with higher power. The 2W infrared laser is suitable for engraving other metals or plastics.
14. Is it possible for Ador to work for extended periods without breaks?
Ador can operate continuously if the indoor temperature is maintained at a suitable level.
Laser Module: 5-30°C (41-86°F)
Printing Module: 16-25°C (60.8-77°F)
About Materials
1. Can Ador engrave on metals?
The 10W/20W Diode Laser Modules are versatile tools that can be used for different applications. They can directly engrave metal surfaces or remove anodized coatings on metals. Moreover, when combined with the 2W Infrared Laser Add-on, it can engrave other materials such as gold, brass, titanium, aluminum, black acrylic, ABS plastic, silver, and iron.
2. What is the maximum thickness can Ador cut?
The cutting thickness varies for different materials; for detailed information, please refer to Ador’s Material List.
3. Can Ador cut through plastic?
It is not recommended to laser cut plastic under any circumstances. However, by using 2W Infrared Laser Add-on, it is able to engrave ABS plastic.
4. Can Ador engrave or cut acrylic?
Due to the wavelength of the diode laser, Ador can only engrave or cut black acrylic. Any light-colored or transparent acrylic cannot be engraved or cut by Ador. If you have engraving or cutting needs for transparent acrylic, please refer to FLUX Beam Series CO2 laser cutting machine.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OK